CBAM software · for producers outside the EU and EU importers
Model your installation once — routes, precursors, electricity — and DeCarbonPro prices every good you ship two ways: on the EU default value, and on your own proven emissions. Then it generates the operator’s emissions report you put to an accredited verifier, and the summary your buyer receives — every figure citing the act behind it.
Start from what you know: Estimate my cost by sector →What does my CN code carry? →My imports, by country of origin →All free tools →
Features
four things, all included in the one plan. Nothing here is an add-on, and nothing is metered.
Draw the production routes, the precursors you buy in, the fuels you burn and the electricity you use, on one canvas. Connect them once and every good you ship prices off that model.
Direct and indirect embedded emissions, computed the way the implementing act sets out — including purchased precursors, self-generated and purchased electricity, and waste gases. Every figure names the article behind it.
Calculation: IR (EU) 2025/2547 · default values and mark-up: IR (EU) 2026/1740, Annex I · benchmarks and free allocation: IR (EU) 2025/2620
The operator's emissions report an accredited verifier checks, and the summary your EU buyer receives — generated from the model you already built, as often as you need.
The Operator's Emissions Report — IR (EU) 2025/2547, Annex IV
With DeCarbonPro
Operator’s Emissions Report — generated
Example: our engine’s output on the Commission’s published Steel-3 workbook.
Give your buyers a controlled view of your emissions data instead of emailing spreadsheets. One link, optionally password-protected, that you can withdraw.
What the figures rest on
Every figure on this site resolves to a published instrument. Here is the whole shelf, and the day each act was last checked against the Official Journal.
16 acts held · last checked against the Official Journal on 11 Aug 2026
Provenance
Not our opinion, and not a rule of thumb. Every figure on this site resolves to a sentence in a published act. Here is one of them, in full.
the mark-up shall be 10 % for the year 2026, 20 % for the year 2027 and 30 % for the year 2028 and onwards
Default values carry a mark-up — 10% in 2026 on iron and steel, aluminium, cement and hydrogen, rising to 30% by 2028. Proving your own number is what removes it.
Proving your own number is what removes it.
The producer proves the figure. The importer pays the bill. Both need the same record.
For producers and installation operators outside the EU
Model the installation once and every good you ship prices off it — on the EU default value and on your own proven emissions, with the article cited on each figure.
US$2,490/year · 21 days free first · 30-day money-back on your first payment
For EU importers and their representatives
What each covered code carries, and what each country of origin costs you, are open today and free. The filing side — supplier data, import lines and the declaration itself — is in build.
For EU importers and their representatives
The filing side of CBAM is not built yet. This is what it will do when it is, so you can judge whether to wait for it. What is open to importers today is in the free tools below, and is not repeated here.
The single mass-based threshold — 50 tonnes of net mass: Reg. (EU) 2023/956, Annex VII point 1, referred to in Art. 2a (inserted by Reg. (EU) 2025/2083). The registry submission is Art. 35.
No date and no price are set for this module, and neither is implied by the plan above. We will say so here the day it opens.
Why us
Stated plainly, so you can compare us against anything else you are looking at.
One plan, US$2,490 a year
One price, billed once a year. There is no tier to compare against, no upgrade to discover later and no monthly option to be talked into.
No limits
No tonnage cap. No supplier cap. No entity tiers. The price does not move because you shipped more, added a supplier or opened a second office.
Every feature included
Everything above comes with the plan. Nothing is held back for a higher tier, and there is no per-report or per-calculation charge.
21 days free, one installation
Use the whole product first. Anything you export is watermarked until you subscribe, and no card is needed to start.
Built on the regulation
Every figure names the article behind it, and the acts are held on this site and checked against the Official Journal.
Support from the people who built it
Email support, including help getting your first dataset in. Included in the price — there is nothing extra to buy.
Pricing
One plan. The declarant module above is not priced yet and is not part of it.
US$2,490 / year
21 days free · one installation · reports watermarked until you subscribe
Billed once a year. Cancel whenever you like — there is no notice period and no cancellation fee. 30-day money-back on your first payment.
Start free trial ↗Free · no registration
Pick a CN code and the map prices it against the EU default embedded emissions for every country of origin, at the current certificate price. Sign in to overlay your own import history.
Loading the map…
Q1 2026 · last figure held on this site · Reg. (EU) 2023/956 Art. 21(1a), as amended by Reg. (EU) 2025/2083
Free, no registration
No sign-up, no card and no trial clock on any of these — and the calculator covers all five CBAM sectors it can price. They estimate. The platform is the record. That line does not move.
The platform is the subscription — one plan, and everything in it.
The calendar you’re on
Dates as the acts set them · not legal or compliance advice
Read next
The reading behind the numbers — sectors, countries, and what the acts actually ask of you.
The platform
Free for 21 days first — one installation, reports watermarked until you subscribe. 30-day money-back on your first payment, no per-report charge, support included.